With its 328 kW diesel engine and clever compressor managements system enabling to use normal 24 bar DTH hammer or 30 bar high pressure DTH hammer. Operator can easily choose used compressor airflow (24.4 m³ / 24bar or 21.6m³ / 30bar) and air pressure via machine user interface. All power is fully utilized, translating into low energy consumption, low operating costs and top productivity. The rig performs efficiently and economically with 4" HP hammer and 3", 4", 5" and 6" hammers. On top of high performance and productivity, the machine offers a first class operator environment with solutions that enable seamless interaction of man and machine: the operator handles drilling and the automation takes care of all machine controls.

Advantages

• Perfect match for the 4” high pressure hammer
• First-rate fuel economy
• Low operation costs
• Modern and accurate control system
• Unobstructed component layout

Technical data
Recommended hole diameter	90 - 165 mm (3 ½ - 6 ½ in.)
Drill rod / tube diameter	76, 89, 102 and 114 mm (3, 3 ½, 4 and 4 ½ in.)
DTH-hammer	4, 5 and 6 in. (Sandvik RH460 & RH560)
Engine type	Caterpillar C13 (Tier 3 and 4)
Engine output power	328 kW /1800 rpm (Tier 3 and 4)
Flushing air capacity	24.4 m3/min, at 24 bar 21.6 m3/min, at 30 bar (HP)
Operator cabin	HVC550 (High visibility)
Certificate	ROPS and FOPS
Transport Length	12.0 m (38 ft)
Transport Width	2.49 m (8.2 ft)
Transport Height	3.29 m (11 ft)
Weight approx.	24,050 kg (53,021 lb)