2655 hits

2655 hits on ”all pages” in entire website

DU311-TK Tracked in-the-hole production drill rig

Sandvik DU311-TK is a versatile, compact and track mounted ITH longhole drill fitted with an onboard booster and designed for underground mining in 4 x 4 m or larger production drifts. It can also be used for reaming up to Ø445 mm (17½”) holes in rapid raising using

DU311-TVK Tracked in-the-hole production drill rig

Sandvik DU311-TVK is a versatile, compact and track mounted ITH longhole drill fitted with an onboard booster and designed for underground mining in 4 x 4 m or larger production drifts. It can be used with the V-30 reaming head in Ø762 mm (30”) raise boring for slot or

DU311-TVK

Sandvik DU311-TVK is a versatile, compact and track mounted ITH longhole drill fitted with an onboard booster and designed for underground mining in 4 x 4 m or larger production drifts.

DU311-TK Technical specification

Sandvik DU311-TK is a versatile, compact and track mounted ITH longhole drill fitted with an onboard booster and designed for underground mining in 4 x 4 m or larger production drifts.

Drilling Automation Packages Technical specification

Sandvik intelligent drilling jumbo fleet (DD422i, DT922i, DT912D, DT1132i and DT1232i) represents an advanced control system based electro- and diesel hydraulic jumbo technology to provide top-level performance, accuracy and reliability for underground development drilling and tunneling. These

DD422i DD422ie Teleremote drilling Technical specification

Teleremote drilling is an advanced and portable drilling control station available for Sandvik DD422i / DD422iE development drills allowing easy and reliable way to control the drilling operation from the remote location providing possibilities to increase both safety and productivity in

Reaming equipment

The versatility of ITH drilling allows the use of the equipment in slot raising. The V-30 slot raising is a method similar to raise boring and the method uses two ITH hammers mounted on a rigid reaming head body.

KA-series Air compressors

Sandvik KA-series electrically powered air compressors are an alternative to expensive mine air supply infrastructure. The KA-series single- and two-stage air compressors are designed for sup­plying air for 3” to 8” ITH hammers and V-30 boring heads at wide altitude

Boosters & Compressors

Compressed air is required for powering the hammers on the ITH longhole drills. Since all the air required by ITH hammers can not be produced onboard the drill units, portable boosters and compressors allow the delivery of the required air in the mine. Our ITH boosters & compressors

DA101 Pipe handlers

Sandvik DA101 pipe handler is skid mounted and powered by the ITH drill through umbilical hose and designed for forklift transportation.

Go to page: 1 (This page) , 2 , 3 , 4 , 5 , 6 , 7 , … , 266 Next