Technical specifications

243 hits

DU412i Technical specification Product form: Underground drill rigs and bolters

Sandvik DU412i is a highly versatile and compact ITH longhole drill fitted with an onboard booster and designed for underground mining in 3.2 x 3.2 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø3½" - 8½" (90 - 216 mm) longholes, using 3" to 8" ITH hammers and Ø3" to Ø5" (76 - 127 mm) drill pipes. The DU412i can be fitted with a V-30 head for Ø30" (762 mm) reaming in service support, or reaming up to Ø17½" (445 mm) holes with 12" hammers in rapid raising.

Download as PDF Send PDF via email

Ranger DX800i T4 Technical specification Product form: Surface drill rigs

Ranger DX800i is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.

Download as PDF Send PDF via email

DL321 Technical specification Product form: Underground drill rigs and bolters

Sandvik DL321 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.2 x 3.2 m or larger drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64...89 mm longholes up to 38 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm tube rods.

Download as PDF Send PDF via email

DL411 Technical specification Product form: Underground drill rigs and bolters

Sandvik DL411 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.6 x 3.6 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64...115 mm longholes up to 54 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm/T45, ST58 and ST68 tube rods. The DL411 is mounted on a 4-wheel drive frame-steered and diesel-powered carrier.

Download as PDF Send PDF via email

DD311 Technical specification Product form: Underground drill rigs and bolters

Sandvik DD311 is a single-boom electro-hydraulic jumbo for fast and accurate drilling in drifting and tunneling of 40 m² cross sections. The hydraulic controls enable accurate and efficient drilling performance.

Download as PDF Send PDF via email

DD321 Technical specification Product form: Underground drill rigs and bolters

Sandvik DD321 is a compact two-boom jumbo for demanding conditions and multiple applications. The jumbo is capable of face drilling, cross-cut drilling and bolt hole drilling.

Download as PDF Send PDF via email

DL230L Technical specification Product form: Underground drill rigs and bolters

Sandvik DL230L is a low-profile single-boom electro-hydraulic production drilling jumbo designed to work in excavations with headroom as low as 1.7 meters. Sandvik DL230L is capable of drilling several lines of parallel holes, up, down and horizontally, as deep as 23 meters.

Download as PDF Send PDF via email

DL2710 Technical specification Product form: Underground drill rigs and bolters

Sandvik DL2710 is a fully mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mining in 3.2 x 3.2 meter or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel diameter 64 – 89 mm longholes up to 38 meters in length, using T38, T45 and T51 MF-rods or Ø65 mm tube rods.

Download as PDF Send PDF via email

DD211L Technical specification Product form: Underground drill rigs and bolters

Sandvik DD211L is a low-profile single-boom electrohydraulic drill designed to work in excavations with headroom as low as 1.7 meters. The robust universal boom has a large optimum shaped coverage, 360-degrees rotation and full automatic parallelism for fast and easy face drilling. The boom can also be used for cross-cutting. The hose layout is specifically designed to maximize protection in low headings.

Download as PDF Send PDF via email

DB311 Technical specification Product form: Underground drill rigs and bolters

Sandvik DB311 is a Secondary Breaking Unit (SBU) for rock boulders reduction and ore facilitation in mass mining methods, enabling fast recovery of full mining production when large rock boulders cause draw points blockages.

Download as PDF Send PDF via email

Go to page: 1 (This page) , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , … , 25 Next