Our Sandvik TH663i is a high productivity 63 tonne articulated underground dump truck for use in 6 x 6 meter haulage ways. This next generation intelligent truck is a safer, efficient, high capacity and easy to maintain underground truck for optimized fleet management.
Sandvik LH409E is a 9.6 tonnes electric Load-Haul-Dump (LHD) developed specially for underground use.
Sandvik LH410 represents state of the art performance in difficult applications, enhanced operator ergonomics and several built-in safety features.
Sandvik LH400T is a robust and cost efficient 10 tonne loader for underground use. It features simplified and durable design for extended reliability in harsh conditions.
Sandvik DL321 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.2 x 3.2 m or larger drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64...89 mm longholes up to 38 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm tube rods.
Sandvik DL411 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.6 x 3.6 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64...115 mm longholes up to 54 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm/T45, ST58 and ST68 tube rods. The DL411 is mounted on a 4-wheel drive frame-steered and diesel-powered carrier.
Sandvik DL2720 is a fully mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mining in 3.2 x 3.2 meters or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel diameter 64 – 89 mm longholes up to 38 meters in length, using T38, T45 and T51 MF-rods or Ø65mm tube rods.
Sandvik DD211L-V is a single-boom low-profile drill designed to work in excavations with headroom as low as two meters.
Sandvik DD311 is a single-boom electro-hydraulic jumbo for fast and accurate drilling in drifting and tunneling of 40 m² cross sections. The hydraulic controls enable accurate and efficient drilling performance.
Sandvik DD321 is a compact two-boom jumbo for demanding conditions and multiple applications. The jumbo is capable of face drilling, cross-cut drilling and bolt hole drilling.
Go to page: Previous , 1 , … , 4 , 5 , 6 , 7 , 8 , 9 (This page) , 10 , 11 , 12 , 13 , … , 22 Next