228 hits
Sandvik CH840i is a technologically advanced, high capacity mid-range cone crusher for secondary and tertiary crushing, designed for crushing applications in mines or large sized quarries.
Sandvik CS840i is a high capacity cone crusher for secondary stage crushing. With up to 50% higher capacity, 25% increased reduction ratio and a reduced recirculation by up to 50%, with the same amount of high-value end product compared to similar crushers in its class, it is a true super producer.
Sandvik QI442 is a heavy duty, self-contained track mobile impact crusher which features the unique Sandvik CI621 Prisec impact chamber. This offers unparalleled flexibility through the ability to work in both primary and secondary applications.
Sandvik US310 is a secondary crushing unit fully assembled on a single trailer frame consisting basically of Sandvik CS86 triple deck vibrating screen and Sandvik CS430 cone crusher.
Sandvik QJ241 is the smallest compact tracked jaw crusher in the world leading series of Sandvik tracked crushers. This highly productive yet self-propelled machine brings the revolutionary features of Sandvik QJ341 to the smaller quarry or demolition site, where operating space is limited, yet high performance demanded.
Built utilising Sandvik's market leading Prisec technology, Sandvik QI341HS is the most versatile, compact mobile impactor in the market today. Capable of operating in primary and secondary applications, it has been designed with productivity, mobility, minimal environmental impact and user friendliness at its core.
Built utilising Sandvik's market leading Prisec technology, Sandvik QI341 is the most versatile, compact mobile impactor in the market today. Capable of operating in primary and secondary applications, it has been designed with productivity, mobility, minimal environmental impact and user friendliness at its core.
Sandvik UH430 is an electrically powered mobile crushing and screening unit mounted on a wheeled chassis. Featuring the proven reliability of Sandvik CH440 cone crusher from Sandvik, it offers exceptional rates of throughput at a low cost per tonne.
Sandvik UH440E is an electrically powered track-mounted complete process machine with a cone crusher and screens onboard. Aimed at the demanding quarry operator, construction company or contractor working with highly abrasive secondary and tertiary applications, Sandvik UH440E features Sandvik CH440 cone crusher, renowned for its strength and reliability, and is capable of achieving high productivity at an excellent reduction ratio and cubicity with high capacity due to its advanced pre-separation system.
Sandvik UI310+ is a primary crushing unit fully assembled on a single trailer frame and mounted on a quad axle bogie, supplied with EBS. This consists of a Sandvik ST1363 feeder screen, CI521 Prisec™ impactor and discharge belt conveyor.
Sandvik HL1560ST is a hydraulic top hammer rock drill
designed for DL411 and DL421 underground longhole
drills. It is capable of drilling Ø89 - 127 mm holes up to 54
meters in depth, using T51 MF-rods or ST58 and ST68
tube rods.
Sandvik UJ310+ is a primary crushing unit fully assembled on a single trailer frame and mounted on a quad axle bogie. Featuring the highly reliable and productive CJ411 jaw crusher it comes complete with a highly efficient pre-screen, feeder motors, starters, frequency drive and electrical control panel.
Sandvik HL300 hydraulic rock drill is designed for longhole production drilling on surface and rock bolting in hard rock bolting in underground hard rock mines. It is also used in light tunneling rigs.
Sandvik HL650 hydraulic rock drill is designed for drilling 64– 102 mm diameter holes. Sandvik HL650 is used in Sandvik surface drill rigs.
Sandvik RD314 high-frequency hydraulic rock drill is designed for bolting and face drilling rigs.
Sandvik QE141 is the latest version of the world’s first revolutionary track mounted scalper.
Our goal of minimum user intervention means that we have focused on delivering huge stockpiling capacity, with ease of stockpile removal, uninhibited material flow and ability to handle the toughest of material with an apron feeder fitted as standard. The 16 ft x 5 ft / 4.7 x 1.5 m screen box is highly aggressive with 9mm throw operating at over 1000 RPM. This ensures that even the most difficult materials can be handled effectively.
Sandvik D90KS is a diesel powered, selfpropelled crawler mounted blasthole drill for mining. It is equipped to rotary drill 229 to 349 mm (9" to 13 3/4") diameter holes.
Sandvik D245S is a diesel powered, self-propelled crawler mounted blasthole drill for mining. This production drill comes with a low-pressure power group for rotary drilling in medium hard rock conditions like those found in coal, copper and gold mines. It drills 127 to 203 mm (5” to 8”) diameter holes. The D245S delivers the most performance from a compact production drill.
Sandvik DD422iE is an intelligent control system based mining jumbo with electric driveline system for underground development drilling and small scale tunneling. This electric driveline system replaces the diesel engine used for tramming producing zero emissions, reduced operating costs and increased drilling productivity via intelligent drilling power management system. Combined with the wide range of automatic drilling functions this drill rig will offer increased productivity, reduced costs and the top level of product safety and care for the environment for underground mining industry.
Sandvik DS211L-M is a fully mechanized one man operated electro-hydraulic low profile bolting machine for rock reinforcement in excavations with headroom as low as 1.6 meters.
Sandvik DS411 is a rock reinforcement drill rig that installs all most common rock bolt types in combination with steel wire meshes when required. Provided with a strong and reliable boom TBR60, it can install from one carrier setup, several rows of rock bolts, from 1.5 m to 3 meters long.
Sandvik DT1131-C is a 3-boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The hydraulic controlled drilling system with added automatic functions and optional instrumentation level enable productive and high quality excavation.
Sandvik DT1231i is a computer-controlled three boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavations.
Sandvik DT611 is a one boom electro hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The hydraulic controlled drilling system with added automatic functions and optional instrumentation enables productive and high quality excavation. Sandvik RD520 rock drills deliver superior performance with high consumable life.
Dino DC400Ri is a hydraulic, self-propelled. self-contained, crawler based surface drilling unit with full radio remote control.
Ranger DX700 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Sandvik DQ240R is hydraulically operated, excavator mounted line drilling unit for dimen-sional stone quarries.
Sandvik DU412i is a highly versatile and compact ITH longhole drill fitted with an onboard booster and designed for underground mining in 3.2 x 3.2 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø3½" - 8½" (90 - 216 mm) longholes, using 3" to 8" ITH hammers and Ø3" to Ø5" (76 - 127 mm) drill pipes. The DU412i can be fitted with a V-30 head for Ø30" (762 mm) reaming in service support, or reaming up to Ø17½" (445 mm) holes with 12" hammers in rapid raising.
Ranger DX800i is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Sandvik DL321 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.2 x 3.2 m or larger drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64...89 mm longholes up to 38 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm tube rods.
Sandvik DL411 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.6 x 3.6 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64...115 mm longholes up to 54 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm/T45, ST58 and ST68 tube rods. The DL411 is mounted on a 4-wheel drive frame-steered and diesel-powered carrier.
Sandvik DD311 is a single-boom electro-hydraulic jumbo for fast and accurate drilling in drifting and tunneling of 40 m² cross sections. The hydraulic controls enable accurate and efficient drilling performance.
Sandvik DD321 is a compact two-boom jumbo for demanding conditions and multiple applications. The jumbo is capable of face drilling, cross-cut drilling and bolt hole drilling.
Sandvik DL230L is a low-profile single-boom electro-hydraulic production drilling jumbo designed to work in excavations with headroom as low as 1.7 meters. Sandvik DL230L is capable of drilling several lines of parallel holes, up, down and horizontally, as deep as 23 meters.
Sandvik DL2710 is a fully mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mining in 3.2 x 3.2 meter or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel diameter 64 – 89 mm longholes up to 38 meters in length, using T38, T45 and T51 MF-rods or Ø65 mm tube rods.
Sandvik DD211L is a low-profile single-boom electrohydraulic drill designed to work in excavations with headroom as low as 1.7 meters. The robust universal boom has a large optimum shaped coverage, 360-degrees rotation and full automatic parallelism for fast and easy face drilling. The boom can also be used for cross-cutting. The hose layout is specifically designed to maximize protection in low headings.
Sandvik DB311 is a Secondary Breaking Unit (SBU) for rock boulders reduction and ore facilitation in mass mining methods, enabling fast recovery of full mining production when large rock boulders cause draw points blockages.
Sandvik US440i is a heavy-duty cone crusher built using the latest technology which has proven capable of operating in the toughest climatic conditions. Featuring the market leading Sandvik CS440 cone crusher it comes with a choice of mantles and settings which make it suitable for a wide range of applications worldwide.
Sandvik UV312 is a tertiary crushing unit fully assembled on a single trailer frame consisting of CS86 four deck vibrating screen and Sandvik CV218 VSI (vertical shaft impactor) crusher.
Sandvik US440E is an electrically powered tracked mounted cone crusher aimed at the demanding quarry operator, construction company or contractor working with hard and abrasive applications. It features Sandvik CS440 cone crusher, Sandvik SS1443 triple deck screener and the SS1013H pre-screen. The cone crusher can take a feed size of 450 mm and produce up to 500 tph. This makes it the perfect mobile cone crusher for secondary crushing applications where high capacity and high size reduction are desired.
Sandvik LH115L is a 5.5 tonnes Low Profile loader. The Sandvik LH115L builds on the proven base of its predecessor the EJC115L with modern safety improvements. Based on the reliable and simplified design, the new Sandvik LH115L has a high availability and it is easy to maintain, which results in optimized lifetime operational costs.
Sandvik UJ640 tracked jaw crusher mounts the highly productive Sandvik CJ615 jaw, on a full tracked chassis but with an electric crusher drive. Sandvik CJ615 crusher is a single toggle 1500 x 1100 mm (60 x 44 in.) jaw crusher, which has been designed and manufactured with customer's real requirements in mind.
Sandvik UH316 is a secondary crushing unit fully assembled on a single trailer frame consisting of a Sandvik XS86 three deck vibrating screen and Sandvik CH430 cone crusher.
Sandvik QJ341+ is a new addition to our bestselling QJ341 jaw crusher range. This model will come with the added benefit of a double deck pre-screen as standard. This will enable the removal of a large amount of fines to increase your throughput resulting in greater efficiency, higher productivity and less wear on the crusher. This will be particularly effective in quarrying applications where you have a high proportion of fines in the feed material.
The direct drive QH441 features the world-leading CH440 Sandvik Hydrocone of which there are thousands of installed units worldwide. Designed for minimal operator intervention, Sandvik QH441 utilizes latest technology to ensure uninterrupted productivity. Although specifically aimed at the large operator, Sandvik QH441 is engineered for ease of mobility, with a rapid set-up time.
Sandvik QH331 mobile cone crusher has been designed to meet the most exacting aggregate product quality demands through the use of the Sandvik CH430 cone crusher on a tracked chassis. Through this cone Sandvik QH331 is able to take advantage of the Sandvik developed CSC (cubical shape crushing) techniques, producing material of excellent shape and high qualit
Sandvik QS331 is a compact, self contained mobile cone crusher with an on board diesel engine. Featuring Sandvik CS430 Sandvik cone crusher Sandvik QS331 is capable of accepting large feed sizes and achieving high production capacities.
Sandvik UD211 is a complete crushing unit (primary and secondary crushing with screening) fully assembled on a single trailer frame.
Sandvik UF320 is a complete wheeled screening unit designed for maximum capacity in highly accurate screening operations. Powered by electricity it is fully mobile with hydraulically folding side conveyors and can be easily set-up and transported from site to site within a very short time.
Sandvik UH311 is a secondary/tertiary crushing unit fully assembled on a single trailer frame consisting of a Sandvik CS86 four deck vibrating screen and Sandvik CH430 cone crusher.
Sandvik UJ210 is a wheel mounted jaw crusher which incorporates Sandvik CJ409 jaw crusher. It features an impressively large feed opening for its size, possessing an ideal nip angle providing smooth material flow, high reduction efficiency, single-toggle operation with a deep crushing chamber and easy setting adjustment. All of these features are aimed at producing high capacity operation.
Sandvik HL1060T hydraulic rock drill is designed for surface longhole drilling of 89 - 152 mm diameter holes. Sandvik HL1060T is a standard rock drill for example in Pantera and DP1100i surface drill rigs.
Sandvik UJ210 is a wheel mounted jaw crusher which incorporates the Sandvik CJ409 jaw crusher. It features an impressively large feed opening for its size, possessing an ideal nip angle providing smooth material flow, high reduction efficiency, single-toggle operation with a deep crushing chamber and easy setting adjustment. All of these features are aimed at producing high capacity operation.
Sandvik have more than a century of experience of designing and manufacturing jaw crushers. Sandvik also have a wealth of knowledge about customer's expectations and needs. Jaw crushers are manufactured in a factory which has been certified to ISO9001. This demonstrates our dedication to quality – the design and manufacture of all Jaw crushers meet the highest Quality Assurance standards.
Sandvik HL820T hydraulic rock drill is designed for drilling 64 - 127 mm diameter holes in Sandvik hydraulically controlled surface long hole drill rigs.
Sandvik HLX5 hydraulic rock drill is designed for face, bolt and long hole drilling. Sandvik HLX 5 is standard rock drill for example in Sandvik hydraulic controlled mining and tunneling jumbos.
Commando™ DC300Ri is a hydraulic, self-propelled surface drilling unit on a 4-wheel, oscillated drive carrier, with full radio remote control.
Sandvik D50KS is a diesel powered, self-propelled crawler mounted blasthole drill for mining. It is a powerful mid-range production drill and comes with a low pressure air compressor for rotary drilling. Its normal range is 152 to 229 mm (6” to 9”) diameter holes, but it can optionally drill up to 251 mm (9 7/8”)
hole size.
Sandvik QH332DDHS is a tracked, self contained cone crusher with an onboard diesel engine. It comes complete with a double deck hanging screen which is completely detachable providing you with the flexibility to operate in open or closed circuit all within 30 minutes.
Sandvik DS2711 is a one-man-operated electro-hydraulic rockbolter for rock reinforcement in the underground mines with small and medium cross-sections. The operator works from supported ground while protected under a FOPS-certified canopy structure. Mechanization of the bolting process ensures efficient, constant and durable rockbolt integrity.
Sandvik DT1121i is a computer-controlled two boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavations.
Sandvik DT1131 is a 3-boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The hydraulic controlled drilling system with added automatic functions and optional instrumentation level enable productive and high quality excavation
Ranger DQ500 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Ranger DX700 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Sandvik DL421 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.6 x 3.6 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64 -115 mm longholes up to 54 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm/T45, ST58 and ST68 tube rods.
Ranger D900i is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Commando™ DC130Ri is a fully remote controlled, hydraulic and self-propelled drilling unit on a 4-wheel drive carrier.
Tiger™ DG710 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Leopard DI550 is a diesel powered, self-contained crawler mounted drilling rig designed for DTH blasthole drilling in the mining, quarry and construction industries.
Leopard DI560 is a diesel powered, self-contained crawler mounted drilling rig designed for DTH blasthole drilling in the mining, quarry and construction industries.
Sandvik LH621 is a 21 tonne underground loader for massive underground production and large scale development with state of the art performance and cutting edge technology.
Our Sandvik TH663i is a high productivity 63 tonne articulated underground dump truck for use in 6 x 6 meter haulage ways. This next generation intelligent truck is a safer, efficient, high capacity and easy to maintain underground truck for optimized fleet management.
Sandvik LH514E is a high capacity electric Load-Haul-Dump (LHD) developed specially for underground use. It emits very low noise and no exhaust fumes, thus ensuring a better working environment and reduced mine ventilation costs.
Sandvik LH514 is a high capacity Load-Haul-Dump (LHD) developed specially for underground use.
Sandvik LH409E is a 9.6 tonnes electric Load-Haul-Dump (LHD) developed specially for underground use.
Sandvik DL331 is a fully-mechanized, highly versatile and compact electro-hydraulic top hammer longhole drill designed for underground mining in 3 x 3 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø51...76 mm longholes up to 23 meters in depth, using R32, T38 and T45 rock tools.
Sandvik DL2720 is a fully mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mining in 3.2 x 3.2 meters or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel diameter 64 – 89 mm longholes up to 38 meters in length, using T38, T45 and T51 MF-rods or Ø65mm tube rods.
Sandvik DD422i is an advanced control system based on the electro-hydraulic jumbo to provide top-level performance, accuracy and reliability for underground development drilling and small scale tunneling. The drill rig has the widest range of automatic drilling functions to give increased productivity with reduced costs, top-level product safety and access to the future of underground mining.
Sandvik DL210 is a compact and flexible electro-hydraulic long-hole jumbo for production drilling in underground mines.
Sandvik DD210 is a compact and flexible single-boom electro-hydraulic jumbo for tunneling and mining development in cross sections up to 24 m². The robust universal boom has a large optimum shaped coverage, 360-degree rotation and full automatic parallelism for fast and easy feed positioning, and accurate face drilling.
Sandvik UV320 is an integrated Vertical Shaft Impactor and three-way split screening system, designed for the production of premium shaped aggregates for the concrete and asphalt industries.
Our Sandvik DA101 is designed to carry and handle a wide range of drill pipe sizes. Sandvik DA101 has a flexible, telescopic manipulator arm which enables the operator to add and remove pipe by remote control. The hydraulic manipulator arm is powered through an umbilical hose tethered to the drill.
Sandvik CS550 is the latest high capacity cone crusher that gives you the best operational and cost performance. It is a tough, uncompromising machine with a large intake and a new chamber design to match the jaw crusher in the primary stage. With up to 50% higher capacity, 25% increased reduction ratio and a reduced recirculation by up to 50%, with the same amount of high-value end product compared to similar crushers in its class, the CS550 is a true super producer.
Sandvik OE15W40-C is a super-long-term all season engine oil for diesel and gasoline engines with and without turbo charging in passenger cars, trucks, buses and industrial equipment that have high requirements with respect to engine cleanliness and maintenance intervals.
Proper function and operating safety of hydraulic systems are largely influenced by the quality of the hydraulic medium. In addition to the task of transferring forces, the operating fluid must seal, cool and lubricate.
Sandvik LH202 is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class.
Sandvik LH203 is a compact and lightweight loader for narrow vein mining applications. Sandvik LH203 features a tramming capacity of 3.5 metric tons and a best-in-class payload-to-own-weight ratio.
Sandvik 1190E is an electrically powered, self-propelled crawler mounted blasthole drill equipped to rotary drill 229-349 mm (9” to 13 3/4”) diameter blastholes in mining applications.
Sandvik DR412i is a diesel-powered, self-propelled, crawler-mounted blasthole drill for surface mining. It is standard equipped for rotary with optional down-the-hole (DTH) hammer drilling power.
Sandvik QH331HS is a tracked, self contained cone crusher with an on board diesel engine. The Sandvik CH430 cone crusher is at the heart of this world leading piece of crushing technology. It is equipped with a hydroset system which provides CSS adjustment at the touch of a button. The automatic setting regulation system not only optimizes production, it also keeps track of liner wear, thus making it easy to plan liner changes and minimize interruptions in production.
Sandvik HEX1 hydraulic rock drill is designed for a maximum recommended diameter of 45 mm. Typical application is foundation drilling, road cutting, trenching, bolting, line drilling in dimensional stone quarries and other special drilling applications with Sandvik DC120 rigs.
Sandvik QS331HS is a tracked, self contained cone crusher with an on board diesel engine. Featuring the CS430 Sandvik secondary cone crusher which is capable of accepting large feed sizes and achieving high production capacities is at the heart of this world leading piece of crushing technology.
Sandvik HL1560T hydraulic rock drill is designed for surface long-hole drilling of Ø89 - 152 mm (3½ - 6 in.) holes and it is standard on Pantera surface top hammer drills.
Sandvik HL710 hydraulic rock drill is designed for long hole drilling of 64 - 115 mm diameter holes. It is used in Sandvik underground production and surface drill rigs.
Sandvik HL820ST is a hydraulic top hammer rock drill designed for DL311 and DL321 underground longhole drills. It is capable of drilling Ø54 - 89 mm holes up to 38 meters in depth, using T35, T38, T45, T51 MF-rods or Ø65 mm tube rods.
Sandvik HLX1 hydraulic rock drill is designed for small diameter holes. Typical application is drilling / bolting in confined environment with Sandvik DS211L-M lowprofile rigs.
Sandvik RD520 hydraulic rock drill is designed for face drilling on Sandvik mine development and tunneling jumbos. It is also suitable for bolt hole, exploration and injection hole drilling.
Sandvik DD311D is a single-boom diesel-hydraulic jumbo for fast and accurate drilling in drifting and tunneling of 40 m² cross sections. The hydraulic controls enable accurate and efficient drilling performance.
Sandvik QH332 mobile cone crusher has been designed to meet the most exacting aggregate product quality demands through the use of the Sandvik CH430 cone crusher on a tracked chassis. Through this cone Sandvik QH331 is able to take advantage of the Sandvik developed CSC (cubical shape crushing) techniques, producing material of excellent shape and high quality.
Sandvik QE342 is the latest evolution of our heavy duty, tracked mobile scalping screen. Designed to accommodate the latest emissions compliant engine, the new Sandvik QE342 has been upgraded for improved service access, hydraulics and lighting.
Sandvik CH860i and Sandvik CH865i are technologically advanced, mid-range cone crushers designed for crushing applications in mines or large sized quarries. Each crusher has a hydraulically supported main shaft which is supported at both ends. With a robust design, adjustable eccentric throw, a constant intake opening, high performance can be achieved by proper selection of a Sandvik OEM crushing chamber.
Sandvik DS421 is a rock reinforcement drill rig specialized for cement grouted cable bolt installation in the underground mines and tunnels.
Sandvik DS511, equipped with Sandvik SB120S boom, offers the widest coverage currently available for underground mining operations and civil construction tunnelling.
Sandvik DT1331i is a computer-controlled three boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavations. Drill rig has automatic drilling functions and boom positioning under supervision of the operator of the drill rig.
Sandvik DT821-SC is a two boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The hydraulic controlled drilling system with added automatic functions and optional instrumentation enable productive and high quality excavation. Sandvik RD525 rock drills deliver superior performance with high consumable life.
Sandvik DT922i is an advanced control system based electro- hydraulic two boom jumbo to provide top-level performance, accuracy and reliability for tunneling. The rig has the widest range of automatic drilling functions to give increased productivity with reduced costs, top-level product safety and access to the future of tunneling.
Pantera DP1500i is intelligent, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin and a rod changer.
Pantera DP1500i is intelligent, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin and a rod changer.
Ranger DX500 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Ranger DX600 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Ranger DX800 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Sandvik UV210 is a tertiary crushing unit fully assembled on a single trailer frame consisting of a CS86 triple deck vibrating screen and Sandvik CV217 VSI (vertical shaft impactor) crusher.
Lubricating and hydraulic oil with excellent low temperature flowability and good viscosity temperature behaviour should be used in machines and aggregates which have a wide operating temperature range or viscosity-sensitive hydraulic control units.
The Sandvik OC10-C series was developed to meet the increased demands of sliding vane and screwtype compressors. Due to function, there is intensive turbulence of cooling oil and oxygen from the air. At final compression temperatures up to 110 °C, the oils are exposed to serious attack by oxidation, which accelerates aging. The selection of special oils of the MC synthesis and additives makes long-term operation free of malfunctions possible. For optimum function of the oil separator, air release capacity and low foaming tendency are characteristic of oils for screw-type compressors.
Sandvik LH209L is a low profile LHD with excellent performance in limited heights.
Sandvik CH830i is a technologically advanced, high capacity mid-range cone crusher for secondary and tertiary crushing, designed for crushing applications in mines or large sized quarries.
Sandvik LZ101LE is designed for Extra Low Profile (XLP) environment. Sandvik LZ101LE is remote controlled machine for multiple uses such as underground mining and construction.
Ranger DX800i is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Tiger™ DG810 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Leopard DI450 is a diesel powered, self-contained crawler mounted drilling rig designed for DTH blasthole drilling in the mining, quarry and construction industries.
Sandvik DL311 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.2 x 3.2 m or larger drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64…89 mm longholes up to 38 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm tube rods.
Sandvik DD220L is a low profile twin-boom electro-hydraulic drilling machine designed to operate in the excavations with a headroom as low as 1.7 m.
Sandvik DB120 is a completely self-contained unit for secondary breaking using drill-split method. It breaks oversized boulders in a safe and efficient way to manage material flows and minimize production downtime.
Sandvik TH330 is a narrow 30 metric tonne truck that fits in a 3 x 3 metre heading. Available with a standard forward facing, open operator compartment or an optional forward facing, fully enclosed and air conditioned cabin, Sandvik TH330 offers superior comfort without compromising visibilty.
Sandvik RD535 hydraulic rock drill is designed for face drilling on Sandvik tunneling jumbos. It is also suitable for bolt hole, exploration and injection hole drilling.
Sandvik RDX5 is a robust rock drill for heavy duty rock drilling. It is designed for face and long hole drilling, also used in rock bolting. Sandvik RDX5 is designed to perform even in the harshest conditions.
Sandvik QI441 is a heavy duty, tracked, self propelled impact crusher which features the unique Sandvik CI421 Prisec impact chamber, offering customers unparalleled flexibility through the ability to work in both primary and secondary applications.
Sandvik QH441 HS is a tracked, self contained cone crusher with an on board diesel engine. Sandvik CH440 cone crusher is at the heart of this world leading piece of crushing technology. It is equipped with a hydroset system which provides CSS adjustment at the touch of a button. The automatic setting regulation system not only optimizes production, it also keeps track of liner wear, thus making it easy to plan liner changes and minimize interruptions in production.
Sandvik H200 hydraulic rock drill is designed for rock bolting on Sandvik rock support rigs. It is also suitable for tunneling and mine development drilling on Sandvik narrow vein mining jumbos.
Sandvik QS441 is a tracked, self contained cone crusher with an on board diesel engine. Featuring the world leading CS440 Sandvik cone crusher Sandvik QS441 is capable of accepting large feed sizes and achieving exceptional throughput combined with high product quality.
Sandvik UH320 is an integrated mobile cone crusher and triple deck screening system. Designed to function in open or closed circuit, it features the market leading Sandvik CH430 cone crusher, which comes with a choice of mantles and settings making it suitable for a wide range of applications worldwide.
Sandvik UH412 is a secondary crushing unit fully assembled on a single trailer frame consisting of a Sandvik CS126 four deck vibrating screen and Sandvik CH440 cone crusher.
Sandvik UH550E is a pioneering track-mounted end product crushing and screening unit, which has been designed to meet customer demands. The innovative design combines the new Sandvik CH550 cone crusher with a banana-styled main screen for high capacity accurate screening together with a recirculating conveyor.
Sandvik HF820T hydraulic rock drill is designed for drilling 64-127 mm diameter holes. This rock drill belongs to Sandvik hydraulically controlled surface and underground long hole drill rigs.
Sandvik HL510 S/F hydraulic rock drill is designed for face, bolt and long hole drilling. Sandvik HL 510S is used in DL Series long hole drilling rigs.
Sandvik UJ310 is a primary crushing unit fully assembled on a single trailer frame and mounted on a triple axle bogie. Featuring the highly reliable and productive CJ411 jaw crusher it comes complete with feeder motors, starters, frequency drive and electrical control panel.
Sandvik RD106 hydraulic rock drill is designed for a maximum recommended hole diameter of 45 mm. Typical applications are foundation drilling, road cutting, trenching, bolting, line drilling in dimensional stone quarries and other special drilling applications.
Sandvik RD1635CF is a high-frequency hydraulic rock drill designed for surface long-hole drilling of Ø 89 - 152 mm (3½ - 6 in.) holes.
Sandvik RD525 hydraulic rock drill is designed for face drilling on Sandvik mine development and tunneling jumbos. It is also suitable for bolt hole, exploration and injection hole drilling.
Sandvik QA331 tracked screen is a robust, highly durable machine, designed specifically for the recycling and contractor market.
Sandvik QA335 Doublescreen is a highly versatile mid-sized screening solution equipped with Sandvik's patented Doublescreen arrangement. This innovative technology features two high velocity, angle adjustable screens, where both the primary & secondary screening angles can be adjusted to optimise screening performance & accuracy.
Sandvik QA441 is the largest two deck tracked mobile screen equipped with Sandvik’s patented, world class Doublescreen system. Two high velocity screens that work independently to each other, the primary screen works as a fines extractor, whilst the secondary screen operates as a grader. Two processes combined on one plant, both primary & secondary screening angles can be adjusted relative to each other, offering customers exceptional flexibility and massive throughput
Building upon the highly advanced features of Sandvik QA440 and original Sandvik QA450, Sandvik QA451 represents the second generation product with numerous product refinements, whilst retaining the triple deck screen box that enables it to produce up to four different product types plus one oversize.
Sandvik D75KX is a diesel powered, self-propelled crawler mounted drill designed for high-pressure down-the-hole or low-pressure rotary blasthole drilling in the mining industry. This drill is equipped to rotary drill 229 to 279 mm (9" to 11") diameter holes.
Sandvik D55SP is a diesel powered, self-propelled crawler mounted drill designed for high pressure down-the-hole and/or rotary blasthole drilling in quarrying and the mining industry.
Sandvik D45KS is a diesel powered, self-propelled crawler mounted blasthole drill for mining. It is a mid-range production drill, standard with a high pressure air compressor for DTH drilling. It is equipped for drilling 152 to 229 mm (6" to 9") diameter holes.
Sandvik D25KS is a diesel powered, self-propelled crawler mounted blasthole drill for mining and large scale quarrying. This production drill comes complete with a high pressure power group for down-the-hole hammers. It drills 127 to 172 mm (5” to 6 3/4”) diameter holes.
Sandvik QS332 is a compact, self contained mobile cone crusher with an onboard diesel engine. Featuring our Sandvik CS430 gyratory cone crusher Sandvik QS332 is capable of accepting large feed sizes and achieving high production capacities.
Sandvik TH430L is a 30 metric tonne articulated low profile dump truck that will fit in a 4 x 2 m envelope.
Sandvik CH890i and Sandvik CH895i are technologically advanced, high-capacity cone crushers designed for crushing applications in mines or large sized quarries. Each crusher has a hydraulically supported main shaft which is supported at both ends. With a robust design, adjustable eccentric throw, a constant intake opening, high performance can be achieved by proper selection of a Sandvik OEM crushing chamber.
Sandvik DS211L-V is a low-profile single boom electro-hydraulic drilling machine designed to work in excavations with headroom as low as 2.25 meters. It can drill and install short bolts (up to 2.2 meters) or drill long-holes (up to 10 meters) in any direction.
Sandvik DS311 is the most compact mechanized rockbolter on the market. Its unique rockbolting concept delivers the best ratio of rockbolt length to drift height.
Sandvik DT1131i is a computer-controlled three boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavations.
Sandvik DT1131-C is a 3-boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The hydraulic controlled drilling system with added automatic functions and optional instrumentation level enable productive and high quality excavation.
Sandvik DT1231-SC is a 3-boom electro hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The advanced, electronic controlled drilling system with added automatic functions and optional instrumentation level enable productive and high quality tunneling.
Sandvik DT821-C is a two boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The hydraulic controlled drilling system with added automatic functions and optional instrumentation enable productive and high quality excavation. Sandvik RD520 rock drills deliver superior performance with high consumable life.
Ranger DQ500 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Sandvik DC120 is a hydraulic, self-propelled drilling unit on a 4-wheel drive carrier.
Ranger DX600 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Sandvik DQ440 is hydraulically operated, excavator mounted splitting and trimming unit for dimensional stone quarries.
Our Sandvik TH320 is a narrow 20 metric tonne hauler that fits in a 3 x 3 meter heading. Available with a standard forward facing, open operators compartment or an optional forward facing, fully enclosed and air conditioned cab, the TH320 offers superior comfort without compromising visibility.
Our Sandvik TH430 is a true 30 metric tonne articulated mine dump truck that will fit in a 4 x 4 m envelope.
Sandvik DU311-T is a track mounted In-The-Hole drill designed to drill with ITH hammers powered with high air pressure.
Leopard DI450 is a diesel powered, self-contained crawler mounted drilling rig designed for DTH blasthole drilling in the mining, quarry and construction industries.
Leopard DI550 is a diesel powered, self-contained crawler mounted drilling rig designed for DTH blasthole drilling in the mining, quarry and construction industries.
Sandvik LH517 is a high capacity Load-Haul-Dump (LHD) featuring excellent safety, productivity and reliability. It has a unique fast and efficient way to fill the bucket, compact lightweight design and high capacity.
Sandvik LH400T is a robust and cost efficient 10 tonne loader for underground use. It features simplified and durable design for extended reliability in harsh conditions.
Sandvik DD211L-V is a single-boom low-profile drill designed to work in excavations with headroom as low as two meters.
Sandvik UV311 is a wheel mounted mobile unit that incorporates Sandvik CS 86 triple deck vibrating screen and the highly productive Sansvik CV218 vertical shaft impact crusher.
Our Sandvik DA201 is designed to carry and handle a wide range of drill pipe sizes. Sandvik DA201 has a flexible, telescopic manipulator arm which enables the operator to add and remove pipe by remote control. The hydraulic manipulator can be powered from the onboard diesel or through an umbilical hose tethered to the drill.
Our Sandvik TH545i is a high performance 45 tonne articulated underground dump truck for use in 4.5 x 4.5 meter haulage ways. Truck’s performance is based on proven design, high engine power and high payload related to own weight.
Compressed air has become a major form of energy and the reliable generation of compressed air is vital. Operators require compressors to function perfectly over and beyond entire service intervals.
Sandvik LH307 is a 6.7 tonnes Load-Haul-Dump (LHD) developed specially for underground use for the most diverse application, including development work, mining and tunnelling construction.
Sandvik OE10W40-LA is a Premium Low- SAPS engine oil with the an innovative technology developed for commercial vehicles. It offers maximum fuel economy over the whole drain-interval due to outstanding oxidation and ageing stability.
Sandvik DT621 is a compact two-boom jumbo for demanding conditions and multiple applications. The jumbo is capable of face drilling, cross-cut drilling and bolt hole drilling.
Sandvik QI441HS is a heavy duty, tracked, self propelled impact crusher which features the unique Sandvik CI421 Prisec impact chamber, offering customers unparalleled flexibility through the ability to work in both primary and secondary applications.
Our Sandvik double-pass miners use the most advanced cutting technology to cut coal and industrial minerals continually. These track-mounted miners are extremely productive and reliable solutions, with the design emphasis placed on health and safety, as well as total cost of ownership.
Sandvik UD440E is a self-propelled tracked primary and secondary crushing and screening unit in one. It is aimed at the demanding quarry operator, construction company or contractor in need of high productivity. Fitted with Sandvik CJ412 jaw crusher, Sandvik CH440 cone crusher and Sandvik SS1443 triple deck product screen, it can produce up to 500 tph. The machine is mostly powered by electricity (tracks and support legs are hydraulically driven), which results in an environmentally friendly and cost effective solution.
Sandvik UH312 is a secondary crushing unit fully assembled on a single trailer frame consisting of a CS86 four deck vibrating screen and Sandvik CH440 cone crusher.
Sandvik UH440i is a heavy-duty cone crusher built using the latest technology which has proven capable of operating in the toughest climatic conditions. Featuring the market leading Sandvik CH440 cone crusher it comes with a choice of mantles and settings which make it suitable for a wide range of applications worldwide.
Sandvik UH640 is a flexible, highly productive secondary cone crusher that is able to produce finished sized products thanks to an integral product screen and closed circuit operation.
Sandvik UI210 is a secondary crushing unit fully assembled on a single trailer frame consisting of CS86 triple deck vibrating screen and CI512 HSI (horizontal shaft impactor) crusher.
Sandvik UJ440i is a heavy-duty jaw crusher built using the latest technology which has proven capable of operating in the toughest climatic conditions. Featuring the market leading Sandvik CJ412 jaw with a feed opening of 1200 x 830 mm / 47 ¼ in. x 32 ¾ in. it has a hydraulically adjustable CSS setting with wedges and a choice of jaw plates making it suitable for a wide range of different applications. Trouble free and optimal production is ensured by an onboard high level Intelligence system as standard
The intelligent UJ540 tracked jaw crusher mounts the highly productive Sandvik CJ612 jaw, on a full tracked chassis but with an electric crusher drive. Sandvik CJ612 crusher is a single toggle 1200 x 1100 mm (48 x 44 in.) jaw crusher, which has been designed for high productivity, low energy consumption and automated process control.
Sandvik HL710S is a hydraulic top hammer rock drill designed for DL2710 and DL2720 underground longhole drills. It is capable of drilling Ø54 - 89 mm holes up to 38 meters in depth, using T35, T38, T45, T51 MF-rods or Ø65 mm tube rods.
Sandvik RD414 hydraulic rock drill is designed for long hole drilling with a diameter range from 45 to 76 mm. It is used in Sandvik's underground and surface drill rigs.
Sandvik QE241 is the most compact model in the Sandvik heavy duty scalper range and is designed to meet the requirements of smaller operators who need a high performing, versatile unit with a smaller operating footprint that is easy to transport.
Sandvik QJ341 is the largest in the Sandvik Premium range of tracked jaw crushers. Utilising Sandvik's unrivalled design and manufacturing expertise, it is one of the best-selling track mounted mobile jaw crushers in the world today.
Sandvik LH621i is a 21 tonne loader designed for rapid mine development and large scale underground mine production. With superior hydraulic power for fast bucket filling and drivetrain power for high ramp speed, Sandvik LH621i is designed to quickly clear tunnel headings for rapid advance rates.
Sandvik QS332 is a compact, self contained mobile cone crusher with an onboard diesel engine. Featuring our Sandvik CS430 gyratory cone crusher Sandvik QS332 is capable of accepting large feed sizes and achieving high production capacities.
Sandvik DS221L is a rock reinforcement drill rig specialized into mechanized and cement grouted cablebolts installation.
Sandvik DD311DE is a single-boom electro-hydraulic jumbo with the ability to drill on both diesel and electric power. It is designed for fast and accurate drilling in drifting and tunneling of 40 m² cross sections. The hydraulic controls enable accurate and efficient drilling performance.
Gets the job done - both of them. The all-new 700 range of Horizontal Shaft impact crushers offers new levels of safety and efficiency.
Sandvik LH517i is a high capacity Load-Haul-Dump (LHD) for use in 5 x 5 meter mining tunnels. This intelligent loader features many improvements in operator and maintenance ergonomics. The already high level of safety has been further increased to make the operation and maintenance more fluent.
Sandvik CH870i is a technologically advanced, highcapacity cone crusher designed for crushing applications in mines or large sized quarries. Each crusher has a hydraulically supported main shaft which is supported at both ends. With a robust design, adjustable eccentric throw, a constant intake opening, high performance can be achieved by proper selection of a Sandvik OEM crushing chamber.
Sandvik DL431 is a fully-mechanized, highly versatile and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.2 x 3.2 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64…89 mm longholes up to 38 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm/T45 tube rods.
Sandvik DT1131-JP is a 3-boom electro-hydraulic jumbo for fast and accurate drilling in tunneling, cavern excavation and large scale underground excavation works. It is equipped with two basket booms and a unique boom selection which is specially designed for minibench applications.
Sandvik DT1131-SC is a 3-boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The advanced, electronic controlled drilling system with added automatic functions and optional instrumentation level enable productive and high quality tunneling.
Sandvik DT1231 is a three boom electro hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The hydraulic controlled drilling system with added automatic functions and optional instrumentation level enable productive and high quality excavation.
Sandvik DT821 is a two boom electro hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The hydraulic controlled drilling system with added automatic functions and optional instrumentation enable productive and high quality excavation. The RD520 rock drills deliver superior performance with high consumable life.
Sandvik DT831-SC is a three boom electro-hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation. The electronic controlled drilling system with added automatic functions and optional instrumentation enable productive and high quality excavation
Dino DC400Ri is a hydraulic, self-propelled. self-contained, crawler based surface drilling unit with full radio remote control.
Pantera DP1100i is intelligent, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin and a rod changer.
Pantera DP1100i is intelligent, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin and a rod changer.
Sandvik DC121R is a remote controlled, hydraulic and self-propelled drilling unit on a 4- wheel drive carrier.
Ranger DX800 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Sandvik DQ440ZR is hydraulically operated, excavator mounted splitting and trimming unit for dimensional stone quarries.
Our Sandvik TH540 is a high performance 40 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways.
Our Sandvik TH551i is a high productivity 51 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways. This next generation intelligent truck is a safer, efficient, high capacity and easy to maintain underground truck for optimized fleet management.
Ranger D900i is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Our Sandvik TH315 is a narrow 15 metric tonne truck that fits in a 3 x 3 metre heading. Designed with a side seated operators compartment for maxium operator comfort in applications which require both forward and reverse operation.
Sandvik LH410 represents state of the art performance in difficult applications, enhanced operator ergonomics and several built-in safety features.
Our Sandvik DD2711 is a compact and flexible single-boom electro-hydraulic jumbo for mining development and construction tunneling for small and medium size tunnels with cross-section (Width x Height)
Sandvik DD421 is a two boom electro-hydraulic jumbo for fast and accurate drilling in drifting and tunneling of 8 - 60 m² cross sections.
Sandvik DB331 is a Secondary Breaking Unit (SBU) for rock boulders reduction and ore facilitation under draw points, it is an autonomous drill based on self-contained diesel hydraulic carrier, with on-board water tank and large air compressor for air-mist flushing.
Our Sandvik DA201 is designed to carry and handle a wide range of drill pipe sizes. Sandvik DA201 has a flexible, telescopic manipulator arm which enables the operator to add and remove pipe by remote control. The hydraulic manipulator can be powered from the onboard diesel or through an umbilical hose tethered to the drill.
Our Sandvik DA101 is designed to carry and handle a wide range of drill pipe sizes. Sandvik DA101 has a flexible, telescopic manipulator arm which enables the operator to add and remove pipe by remote control. The hydraulic manipulator arm is powered through an umbilical hose tethered to the drill.
Sandvik OA85W140 is a mineral universal gear oil for use in manual transmissions and axle gearboxes in mining and construction equipment.
Sandvik OS series is a heavy-duty TH shank lubrication and DTH hammer oil of very high quality. The product is made of solvent-refined paraffin base oil and special additives, which counteract wear and corrosion and produce good adhesion.
The Sandvik OT220 products are industrial gear oils of the latest generation, having outstanding extreme pressure characteristics (EP/AW properties) and an extremely high load carrying capacity. They are industrial gear oils with excellent demulsifying properties which can be used in all types of enclosed gear drives with circulation or splash lubrication systems.
The products of the Sandvik OH46-ZF series are universal, zinc and ash-free lubricating oils and hydraulic fluids. They are based on special hydrotreated base oils (group III base oils). They offer high natural shear-stable viscosity index (VI > 140).
Commando™ DC300Ri is a hydraulic, self-propelled surface drilling unit on a 4-wheel, oscillated drive carrier, with full radio remote control.
Sandvik DT721 is a two boom electro-hydraulic jumbo for fast and accurate drilling in drifting and tunneling of 8 - 60 m² cross sections.
Sandvik LH208L is a 7.7 tonnes capacity underground low-profile LHD designed to work in low profile room and pillar mining and extra low profile reef mining.
Our upgraded Sandvik LS312 flameproof underground loader is an enhanced 12 tonne high-capacity and heavy-duty loader powered by the C7.1 mechanical engine with Tier II emission standards.
Sandvik CG800i crushers are built to be robust, reliable and efficient. Connected to My Sandvik, they revolutionize availability and optimize uptime by giving you actionable insights into how the crusher is performing. All to give you optimal reliability and drive down operating costs.
Sandvik QE442 is the largest heavy duty model in our mobile scalper range. Designed for the serious aggregate producer, it has been upgraded to incorporate many product refinements for improved plant durability, efficiency, quicker set-up and reduced cost of ownership. This includes a new redesigned screen box to further strengthen longevity and reliability in arduous applications.
: Change language