Technical specifications

220 hits

RDX5 Technical specification Product form: Rock drills

Sandvik RDX5 is a robust rock drill for heavy duty rock drilling. It is designed for face and long hole drilling, also used in rock bolting. Sandvik RDX5 is designed to perform even in the harshest conditions.

Download as PDF Send PDF via email

RD535 Technical specification Product form: Rock drills

Sandvik RD535 hydraulic rock drill is designed for face drilling on Sandvik tunneling jumbos. It is also suitable for bolt hole, exploration and injection hole drilling.

Download as PDF Send PDF via email

DA201 Technical specification (imperial) Product form: Underground drill rigs and bolters

Our Sandvik DA201 is designed to carry and handle a wide range of drill pipe sizes. Sandvik DA201 has a flexible, telescopic manipulator arm which enables the operator to add and remove pipe by remote control. The hydraulic manipulator can be powered from the onboard diesel or through an umbilical hose tethered to the drill.

Download as PDF Send PDF via email

DD211L Technical specification Product form: Underground drill rigs and bolters

Sandvik DD211L is a low-profile single-boom electrohydraulic drill designed to work in excavations with headroom as low as 1.7 meters. The robust universal boom has a large optimum shaped coverage, 360-degrees rotation and full automatic parallelism for fast and easy face drilling. The boom can also be used for cross-cutting. The hose layout is specifically designed to maximize protection in low headings.

Download as PDF Send PDF via email

DD211L-V Technical specification Product form: Underground drill rigs and bolters

Sandvik DD211L-V is a single-boom low-profile drill designed to work in excavations with headroom as low as two meters.

Download as PDF Send PDF via email

DD311 Technical specification Product form: Underground drill rigs and bolters

Sandvik DD311 is a single-boom electro-hydraulic jumbo for fast and accurate drilling in drifting and tunneling of 40 m² cross sections. The hydraulic controls enable accurate and efficient drilling performance.

Download as PDF Send PDF via email

DD321 Technical specification Product form: Underground drill rigs and bolters

Sandvik DD321 is a compact two-boom jumbo for demanding conditions and multiple applications. The jumbo is capable of face drilling, cross-cut drilling and bolt hole drilling.

Download as PDF Send PDF via email

DD422i Technical specification Product form: Underground drill rigs and bolters

Sandvik DD422i is an advanced control system based on the electro-hydraulic jumbo to provide top-level performance, accuracy and reliability for underground development drilling and small scale tunneling. The drill rig has the widest range of automatic drilling functions to give increased productivity with reduced costs, top-level product safety and access to the future of underground mining.

Download as PDF Send PDF via email

DL230L Technical specification Product form: Underground drill rigs and bolters

Sandvik DL230L is a low-profile single-boom electro-hydraulic production drilling jumbo designed to work in excavations with headroom as low as 1.7 meters. Sandvik DL230L is capable of drilling several lines of parallel holes, up, down and horizontally, as deep as 23 meters.

Download as PDF Send PDF via email

DL2720 Technical specification Product form: Underground drill rigs and bolters

Sandvik DL2720 is a fully mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mining in 3.2 x 3.2 meters or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel diameter 64 – 89 mm longholes up to 38 meters in length, using T38, T45 and T51 MF-rods or Ø65mm tube rods.

Download as PDF Send PDF via email

Go to page: Previous , 1 , 2 , 3 , 4 , 5 (This page) , 6 , 7 , 8 , 9 , 10 , … , 22 Next