Sandvik HL510 S/F hydraulic rock drill is designed for face, bolt and long hole drilling. Sandvik HL 510S is used in DL Series long hole drilling rigs.
Sandvik HL650 hydraulic rock drill is designed for drilling 64– 102 mm diameter holes. Sandvik HL650 is used in Sandvik surface drill rigs.
Sandvik HL710 hydraulic rock drill is designed for long hole drilling of 64 - 115 mm diameter holes. It is used in Sandvik underground production and surface drill rigs.
Sandvik HL710S is a hydraulic top hammer rock drill designed for DL2710 and DL2720 underground longhole drills. It is capable of drilling Ø54 - 89 mm holes up to 38 meters in depth, using T35, T38, T45, T51 MF-rods or Ø65 mm tube rods.
Sandvik HL820ST is a hydraulic top hammer rock drill designed for DL311 and DL321 underground longhole drills. It is capable of drilling Ø54 - 89 mm holes up to 38 meters in depth, using T35, T38, T45, T51 MF-rods or Ø65 mm tube rods.
Sandvik HL820T hydraulic rock drill is designed for drilling 64 - 127 mm diameter holes in Sandvik hydraulically controlled surface long hole drill rigs.
Sandvik HLX5 hydraulic rock drill is designed for face, bolt and long hole drilling. Sandvik HLX 5 is standard rock drill for example in Sandvik hydraulic controlled mining and tunneling jumbos.
Sandvik RD106 hydraulic rock drill is designed for a maximum recommended hole diameter of 45 mm. Typical applications are foundation drilling, road cutting, trenching, bolting, line drilling in dimensional stone quarries and other special drilling applications.
Sandvik RD1635CF is a high-frequency hydraulic rock drill designed for surface long-hole drilling of Ø 89 - 152 mm (3½ - 6 in.) holes.
Sandvik RD314 high-frequency hydraulic rock drill is designed for bolting and face drilling rigs.
Go to page: Previous , 1 , 2 , 3 , 4 (This page) , 5 , 6 , 7 , 8 , 9 , 10 , … , 22 Next