Ranger™ DX800i is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Sandvik DL321 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.2 x 3.2 m or larger drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64...89 mm longholes up to 38 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm tube rods.
Sandvik DL411 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.6 x 3.6 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64...115 mm longholes up to 54 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm/T45, ST58 and ST68 tube rods. The DL411 is mounted on a 4-wheel drive frame-steered and diesel-powered carrier.
Sandvik DD311 is a single-boom electro-hydraulic jumbo for fast and accurate drilling in drifting and tunneling of 40 m² cross sections. The hydraulic controls enable accurate and efficient drilling performance.
Sandvik DD321 is a compact two-boom jumbo for demanding conditions and multiple applications. The jumbo is capable of face drilling, cross-cut drilling and bolt hole drilling.
Sandvik UH430 is an electrically powered mobile crushing and screening unit mounted on a wheeled chassis. Featuring the proven reliability of Sandvik CH440 cone crusher from Sandvik, it offers exceptional rates of throughput at a low cost per tonne.
Sandvik UH440E is an electrically powered track-mounted complete process machine with a cone crusher and screens onboard. Aimed at the demanding quarry operator, construction company or contractor working with highly abrasive secondary and tertiary applications, Sandvik UH440E features Sandvik CH440 cone crusher, renowned for its strength and reliability, and is capable of achieving high productivity at an excellent reduction ratio and cubicity with high capacity due to its advanced pre-separation system.
Sandvik UI310+ is a primary crushing unit fully assembled on a single trailer frame and mounted on a quad axle bogie, supplied with EBS. This consists of a Sandvik ST1363 feeder screen, CI521 Prisec™ impactor and discharge belt conveyor.
Sandvik HL1560ST is a hydraulic top hammer rock drilldesigned for DL411 and DL421 underground longholedrills. It is capable of drilling Ø89 - 127 mm holes up to 54meters in depth, using T51 MF-rods or ST58 and ST68tube rods.
Sandvik UJ310+ is a primary crushing unit fully assembled on a single trailer frame and mounted on a quad axle bogie. Featuring the highly reliable and productive CJ411 jaw crusher it comes complete with a highly efficient pre-screen, feeder motors, starters, frequency drive and electrical control panel.
Go to page:
3 (This page)
Sandvik is an engineering group in mining and rock excavation, metal-cutting, and materials technology.Visit Sandvik Group's website
Copyright © Sandvik AB; (publ) SE-811 81 Sandviken, Sweden Tel +46 (0)26 260000