Technical specifications

219 hits

DC121R Technical specification Product form: Surface drill rigs

Sandvik DC121R is a remote controlled, hydraulic and self-propelled drilling unit on a 4- wheel drive carrier.

Download as PDF Send PDF via email

Ranger DX800 T3 Technical specification Product form: Surface drill rigs

Ranger DX800 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.

Download as PDF Send PDF via email

DQ440ZR Technical specification Product form: Surface drill rigs

Sandvik DQ440ZR is hydraulically operated, excavator mounted splitting and trimming unit for dimensional stone quarries.

Download as PDF Send PDF via email

Commando DC300Ri T3 Technical specification Product form: Surface drill rigs

Commando™ DC300Ri is a hydraulic, self-propelled surface drilling unit on a 4-wheel, oscillated drive carrier, with full radio remote control.

Download as PDF Send PDF via email

HL710S Technical specification Product form: Rock drills

Sandvik HL710S is a hydraulic top hammer rock drill designed for DL2710 and DL2720 underground longhole drills. It is capable of drilling Ø54 - 89 mm holes up to 38 meters in depth, using T35, T38, T45, T51 MF-rods or Ø65 mm tube rods.

Download as PDF Send PDF via email

RD414 Technical specification Product form: Rock drills

Sandvik RD414 hydraulic rock drill is designed for long hole drilling with a diameter range from 45 to 76 mm. It is used in Sandvik's underground and surface drill rigs.

Download as PDF Send PDF via email

DA101 Technical specification (metric) Product form: Underground drill rigs and bolters

Our Sandvik DA101 is designed to carry and handle a wide range of drill pipe sizes. Sandvik DA101 has a flexible, telescopic manipulator arm which enables the operator to add and remove pipe by remote control. The hydraulic manipulator arm is powered through an umbilical hose tethered to the drill.

Download as PDF Send PDF via email

DA201 Technical specification (imperial) Product form: Underground drill rigs and bolters

Our Sandvik DA201 is designed to carry and handle a wide range of drill pipe sizes. Sandvik DA201 has a flexible, telescopic manipulator arm which enables the operator to add and remove pipe by remote control. The hydraulic manipulator can be powered from the onboard diesel or through an umbilical hose tethered to the drill.

Download as PDF Send PDF via email

DB331 Technical specification Product form: Underground drill rigs and bolters

Sandvik DB331 is a Secondary Breaking Unit (SBU) for rock boulders reduction and ore facilitation under draw points, it is an autonomous drill based on self-contained diesel hydraulic carrier, with on-board water tank and large air compressor for air-mist flushing.

Download as PDF Send PDF via email

Go to page: Previous , 1 , … , 16 , 17 , 18 , 19 , 20 , 21 , 22 (This page)