Sandvik rock tools for top hammer drilling are designed to transmit intensive impact energy into the rock with the least possible loss of energy. The result is good rock breakage, high penetration rates and high productivity. Along with optimal hole quality, great reliability and long service life, Sandvik tools deliver you the best possible blasting results, outstanding drill-steel economy and low overall operating cost.
Sandvik Stationary VSI impact crushers are designed for higher capacity, reduced power consumption, reduced maintenance costs and intervals.
Sandvik have a wide range of rotary drilling tools needed for our customers entire process, offering a complete drill string for rotary applications, Sandvik has the product to meet your specific demands.
Sandvik QE442 Free Flow provides you with two screening solutions in one unit. The heavy duty scalping screen allows you to process large un-screened material on the top deck, whilst providing a fine screening solution for difficult to screen material on the bottom deck. It is your ideal solution for materials with a high fines content, such as soils, aggregates, ores, waste, biomass and other waste derived fuels including products with high moisture contents.
SR Roller Screens are compact, non-vibrating roller grizzlies, roller screens and roller screen crushers ideal for use with non-abrasive materials like coal and limestone, even when materials are wet and sticky.
Sandvik CS840i is a high capacity cone crusher for secondary stage crushing. With up to 50% higher capacity, 25% increased reduction ratio and a reduced recirculation by up to 50%, with the same amount of high-value end product compared to similar crushers in its class, it is a true super producer.
Sandvik CH840i is a technologically advanced, high capacity mid-range cone crusher for secondary and tertiary crushing, designed for crushing applications in mines or large sized quarries.
Sandvik DU412i is a highly versatile and compact ITH longhole drill fitted with an onboard booster and designed for underground mining in 3.2 x 3.2 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø3½" - 8½" (90 - 216 mm) longholes, using 3" to 8" ITH hammers and Ø3" to Ø5" (76 - 127 mm) drill pipes. The DU412i can be fitted with a V-30 head for Ø30" (762 mm) reaming in service support, or reaming up to Ø17½" (445 mm) holes with 12" hammers in rapid raising.
Ranger DX800i is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin (F.O.P.S. and R.O.P.S.) and rod handling system.
Sandvik DL321 is a fully-mechanized and compact electro-hydraulic top hammer longhole drill designed for underground mass mining in 3.2 x 3.2 m or larger drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø64...89 mm longholes up to 38 meters in depth, using T38, T45 and T51 MF-rods or Ø65 mm tube rods.