Ranger™ DXi – It's all covered
For over 30 years, the Ranger™ series by Sandvik has worked hard in countless sites, earning it a reputation of versatility and performance. The Ranger™ DXi series is the culmination of all the experience gathered over the years, taking top hammer drilling to a new level.
Get reach
The revolving superstructure with 290° rotation enables coverage unlike anything else in the market – 55 m². This means more holes with less tramming, and at the end of the day, more productive working days with up to 60 minutes more drilling in each shift.
Get performance
Over the years, the trusted and powerful RD900 series has proven its value on countless sites and continues to power the Ranger™ DXi series. As an even more powerful option we now offer the upgraded RD930C rock drill. It boasts an excellent penetration rate, enabling up to 15% better productivity with reduced fuel consumption. And the all-new, unique CT67 and CT55 rock tools transform all that power to straight holes.
New rock drill RD930
- 15% better productivity
- 6.6% lower fuel consumption
New rock tools CT67 & CT55
- Pioneering curved thread system
- Trouble-free drilling
- Easy coupling and uncoupling
- Productivity enabler
Rock drills for all hole sizes
- RD921 64–89 mm
- RD925 89–115 mm
- RD927 92–140 mm
- RD930 115–152 mm
Get connected
Data management is another key to improving productivity. The in-depth fleet data makes monitoring productivity, efficiency, and sustainability easy.
- Open Drill Interface
Connect your Sandvik drill to any 3rd party navigation, telematics or fleet management system - My Sandvik Insight & Productivity
Secure productivity, efficiency and uptime with in-depth fleet data. - My Sandvik Onsite
Monitor productivity and integrate drills into mine systems and processes
Ranger™ DXi in action
Technical data
| Ranger™ DX810i | Ranger™ DX910i | |
| Hole diameter | 64–127* mm (3”–5”) | 89–140** mm (3½”–5½”) |
| Rock drill | RD925M, RD925M-C, RD921S, RD921S-C | RD927L, RD927L-C, RD930C |
| Percussion output power | 25kW, 21kW (33.5 hp, 28 hp) | 25kW, 21kW (33.5 hp, 28 hp) |
| Rock tools | 38 mm, 45 mm and 51 mm (1½”, 1¾” and 2”) | 51 mm and 60 mm (2” and 2⅜”) |
| Drilling coverage | 55 m² (592 ft²) | 55 m² (592 ft²) |
| Engine output | 185kW, 248 hp | 210kW, 282 hp |
| Flushing air | 8.5 m3/min, up to 10 bar, 300 cfm | 9.5 m3/min, up to 10 bar, 335 cfm |
| *Please contact your Sandvik representative for hole needs larger than 115 millimeters. | **Please contact your Sandvik representative for hole needs larger than 127 millimeters. | |