Sandvik Alpha™ 360

Alpha 360 and Speedy bit

Sandvik Alpha™ 360 is the latest development based on our unique and best-selling Sandvik Alpha™ system. With a strong and robust design, it can last twice as long as an industry standard solution - in a wide range of drilling conditions. In addition to superior durability, its excellent hole accuracy also enables outstanding productivity in tunneling and mine development.

STRAIGHT TO THE POINT

We know that drilling accuracy is crucial to ensure desired direction and profile in the tunnel. With high drilling precision in straight and parallel holes, it also improves your advance per blast.

Sandvik Alpha™ 360 takes you where you want to go. It is made for Ø 48 to 51 mm hole sizes in face drilling and bolting, and features a strong and robust thread design. The short thread with a sturdy guide system gives superior resistance towards bending stresses, improves bit guidance and ensure excellent energy transfer. This enables high precision collaring also in complex rock formations and against uneven surfaces.

Alpha360-web.jpg

ADVANTAGES

Increased service life

  • Lower cost per meter
  • Less time spent changing tools
  • A safe and more sustainable choice

Superior hole accuracy

  • Increased rate of advance
  • Reduced overbreak

BITS AND RODS ASSORTMENT

Discover the full range of Sandvik AlphaTM 360 bits and rods.

BITS
FLUSHING HOLE, MM BUTTONS, MM ANGLE DIMENSION, D PART NO REMARK
FRONT,
NO SIZE
GAUGE,
NO SIZE
FRONT,
NO SIZE
GAUGE,
NO SIZE
FRONT GAUGE MM
Top_Center_Bit_Front_7581-5148A-S70.png 3x5 1x5 3x9 8x10 10° 35° 48 7581-5148A-S70 Top Center Bit
3x5 1x5 3x9 8x10 10° 35° 48 7581-5148A-S81 Top Center Bit
Speedy_Bit_Front_7581-6048-F49.png 3x5 - 3x8 6x10 10° 35° 49 7581-6048-F49 Speedy Bit
3x6 - 3x9 6x10 10° 40° 51 7581-6051-F49 Speedy Bit
Button_Bit_Front_7581-4349A-R70.png 3x5 1x5 3x9 6x10 5° 35° 48 7581-4348A-S70 SH70
3x5 1x5 3x9 6x10 5° 35° 48 7581-4348A-S81 GC81
3x5 1x5 3x9 6x10 5° 40° 49 7581-4349A-R70 SH70
3x6 1x6 3x9 6x11 10° 35° 51 7581-4351A-S70 SH70
RETRAC BITS
Retrac_Bit_Front_7581-4651A-R70.png 3x6 1x6 3x9 6x10 - 35° 51 7581-4651A-R70 SH70
Retrac_Bit_Front_7581-4864A-R70.png 4x7 1x7 5x9 8x10 - 35° 64 7581-4864A-R70 SH70
REAMING BITS
Reamer_Bit_Front_7581-5602P-S70.png 3x6 1x6 3x13 12x13 - 35° 102 7581-5602P-S70 SH70
3x6 1x6 3x13 12x13 - 35° 102 7581-5602P-S81 GC81
3x7 1x7 3x13 16x13 - 35° 127 7581-5627P-S70 SH70
Black-line.png
ROUND RODS
LENGTH (MM) LENGTH (FT, IN) DIAMETER (MM) PART NO
4915 16'  1 1/2" 39 7324-8149-20
5525 18'  1 1/2" 39 7324-8155-20
6135 20'  1 1/2" 39 7324-8161-20
Alpha360-round-web.png
HEXAGONAL RODS
LENGTH (MM) LENGTH (FT, IN) DIAMETER (MM) PART NO
3700 12'  1 1/2" 35 7324-8237-20
4303 14'  1 1/2" 35 7324-7343-20
4915 16   1 1/2" 35 7324-8249-20
5525 18'  1 1/2" 35 7324-8255-20
Alpha360-hex-web.png