MB650 Bolter miner
Sandvik MB650 is a flameproof-approved (FLP) bolter miner designed for roadway development. It is basically a wide-head continuous miner with special design features for cutting, loading, ground support and face ventilation. Country-specific FLP certifications by various international approval authorities are also possible.
Advantages
- Fully supported roof for operators due to support canopy behind the cutter drum
- Automated, programmable cutting cycle guaranteeing smooth floor conditions
- Push button controlled roof bolter stations (electronic over hydraulic) providing ease to operators
- Low cutter head rotation speed to reduce dust generation
| Technical data | |
|---|---|
| Cutter motor power | 270 kW |
| Electric power supply | 1,000 V |
| Ground clearance | 270 mm |
| Ground pressure | 0.22 MPa |
| Installed power | 546.75 kW |
| Loading capacity | 25 t/min |
| Cutting height | 2,800 - 4,500 mm |
| Cutting width | 5,200 - 5,600 mm |
| RPM of cutter drum | 25.6 rpm |
| Max. tram speed | 15 m/min |
