Breaker accessories

Sandvik breaker accessories range from simple, practical auxiliary kits to advanced automatic Ramlube lubrication systems, digital health monitoring Ramdata systems and effective Ram Air dust suppression systems.

Sandvik has designed all the accessories to ensure a long, trouble-free lifetime with higher productivity. Their purpose is to enable the tool system to be tailored to meet different demands in different applications and working environments. They help the system achieve higher productivity, even greater reliability and reduced operating costs, with minimal environmental impact.

Sandvik Ramdata II uses advanced electronics to sense the impacts and stresses on the hammer. This allows you to to detect issues early, so maintenance can be performed quickly and efficiently. It can also help you to optimize your own working processes, enabling you to maximize productivity.

Sandvik Ramlube I can be used for lubricating the hammer tool and tool bushings. It can be fitted to all Sandvik hammers with the pump unit housed within the carrier's engine compartment and is powered electrically. Ramlube I is reliable in operation and can extend the life of various parts.

Breaker tools subject to extreme wear that requires proper lubrication and care if they to achieve a long, trouble free life. Tool lubricant must also have properties to withstand high temperature and extreme pressure. Sandvik Ramlube II is a solution to these common issues, and extends the lifetime of parts that would usually wear quickly. The equipment enables you to maximize uptime and productivity.

Sandvik Ramlube III is an integrated lubrication device mounted inside the breaker's housing on the power cell itself provides maximal lubrication whilst only using minimum grease amount, prolonging the tool and bushing life.

The location of Sandvik Ramlube III also provides it with full protection from the elements, keeping it free of moisture and dust. In colder climates the location also acts as an advantage because the grease heats along with the breaker.

Sandvik Ramona monitors the breaker's pressure, blow frequency, temperature, maintenance intervals and working hours alerting the operator in the event of a malfunction or incorrect operation. This enables you to make your equipment last longer, and quickly identify maintenance issues which will minimize downtime.

Sandvik Ramair is an air flush system which produces compressed air to prevent dust entering the breaker mechanism, whilst cooling the breaker when working in hot conditions.

Rammer logo for breakers, booms and demolition tools

Rammer® products

Find out more about the complete range of Rammer® products.

Visit Rammer.com

Sandvik distributor portal

Distributor portal

Resource management portal for our distributors and partners.

Visit portal.sandvik (login only)

Bretec logo for breakers, booms and demolition tools

Bretec Products

Find out more about the complete range Bretec of breakers.

Visit Bretec.com