Pre-tensioned screening media

Pre-Tensioned Screening Media System

Sandvik pre-tensioned polymer screening media is intended for installation in screens with cambered/ crowned screen decks, equipped with support bars. Deck designs do not need to be modified since the WK panel is a direct replacement for wire mesh and other tensioned screen panels.

Another advantage with the system is the possibility to get the panels in smaller pieces than traditional wire mesh and conventional tensioned rubber media, making it much easier and safer to handle.

The WK system fills the gap between our WX and WS-systems and is suitable for both wet and dry applications. Choose the WK6000 rubber panel for dry applications with feed size between 30-250 mm or the WK8500 polyurethane panel for wet applications with feed size between 10-100 mm.

Sandvik WK6000 pre-tensioned screen panel

A pre-tensioned rubber screen panel, with punched holes, primarily for fine to medium coarse screening in dry applications with a max feed size of 250 mm.

Sandvik WK8500 PU panel

Pre-tensioned polyurethane screening media with molded holes primarily for fine to medium coarse screening in wet applications.

Up to 15X longer life time than wire mesh*

* Test results are to be considered as results reached under certain and controlled test conditions. These test results should not be treated as specifications and Sandvik does not guarantee, warrant or represent the outcome of test results in any or all circumstances.