DL331 Technical specification


Datasheet updated 2021-03-30 09:28 (supersedes all previous editions)

Sandvik DL331 is a fully-mechanized, highly versatile and compact electro-hydraulic top hammer longhole drill designed for underground mining in 3 x 3 m or larger production drifts. It is capable of drilling vertical and inclined fans and single or parallel Ø51...76 mm longholes up to 23 meters in depth, using R32, T38 and T45 rock tools.

Sandvik DL331 is mounted on a 4-wheel drive frame-steered and diesel-powered carrier. It is equipped with the HLX5 hydraulic rock drill, LHF2000 feed, ERCH12 rod handler, SB60P boom, THC560 hydraulic control system and operator's safety cabin for maximum productivity, safety and hole accuracy. The 360° drilling module rotation and wide boom swing and tilt angles make the unit suitable for most mining methods and various service support applications. The THC560 drilling control system is fitted with automatic features for maximum productivity in varying rock conditions, in up- and downhole drilling.

The layout of the NC5 carrier is designed for good visibility and stability, ensuring safe tramming in narrow mine drifts. The operating and maintenance interface are designed for easy access, safe operation and all service points are accessible from the ground level.