Sandvik HL1560T hydraulic rock drill is designed for surface long-hole drilling of Ø89 - 152 mm (3½ - 6 in.) holes and it is standard on Pantera surface top hammer drills.
Sandvik HL1560T is a heavy hydraulic percussive rock drill with independent rotation and separate flushing, which ensures high reliability. It is equipped with hydraulic actuator ("stabilizer") to control contact between drill bit and rock. This ensures optimal drilling performance and high rock tool service life. Different rock drill versions are available through optional module offering: flushing device for tube drilling, T51 rods and GT60 rods; Power Extractor for tubes and rods and alternative rotation motor displacements. The design is covered by several patents.