STRAIGHT TO THE POINT ALPHA 360 TAKES YOU WHERE YOU WANT TO GO

SANDVIK ALPHA 360 

ALPHA 360 – THE IMPROVED GENERATION OF THE BEST TOOL SYSTEM IN OUR HISTORY

Sandvik Alpha™ 360 is the latest development based on our unique, best-selling tool system, Sandvik Alpha 330. With an even stronger design, Alpha 360 can last twice as long as the industry standard*. In addition to superior durability, its excellent hole accuracy also enables outstanding productivity in tunneling and mine development. Drilling accuracy is crucial to ensure that the tunnel gets the desired direction and profile. High drilling precision, with straight and parallel holes, also improves your advance per blast.

SUPERIOR BENDING STRESS RESISTANCE, BIT GUIDANCE AND ENERGY TRANSFER

Sandvik Alpha™ 360, which is designed for Ø 48-51 mm hole sizes in face drilling and bolting features an entirely new thread design. The short thread on the round rod gives superior resistance towards bending stresses, improved bit guidance and excellent energy transfer. Since the sturdy thread is guided inside the bit skirt, it enables high precision collaring also in complex rock formations and against uneven surfaces.

SANDVIK ALPHA 360 AVAILABILITY SELECTION CHART

BIT IMAGE FLUSHING HOLE, MM BUTTONS, MM ANGLE DIMENSION, D PART NO REMARK
FRONT,
NO SIZE
GAUGE,
NO SIZE
FRONT,
NO SIZE
GAUGE,
NO SIZE
FRONT GAUGE MM

alpha-1.jpg

3x4.5 1x4.5 3x9 8x10 10° 30° 48 7568-5148A-S80 Top Center/GC80
3x4.5 1x4.5 3x9 8x10 10° 30° 48 7568-5148A-S70 Top Center/SH70

alpha-2.jpg

3x6 1x6 3x8 6x10 5° 40° 49 7568-4349A-R48
3x5 1x5 3x9 6x10 30° 48 7568-5348A-S70 SH70
3x5 1x5 3x9 6x10 30° 48 7568-5348A-S80 GC80
alpha-3.jpg 3x6 1x6 3x9 6x10 35° 51 7568-1651A-S70 SH70
alpha-4.jpg 3x5 - 3x9 6x10 10° 35° 48 7568-6048-F49 Speedy bit
3x6 - 3x9 6x10 10° 40° 51 7568-6051-F49 Speedy bit
REAMING BITS
alpha-5.jpg 3x6 1x6 3x10 12x13 - 35° 102 7568-5602P-S48
3x7 1x7 3x10 16x13 - 35° 127 7568-5627P-S48
Drifter rod, T38 - Round 39 - α360
LENGTH, MM FT/IN DIAMETER, MM

drifter-rod.jpg

4305 14 ft 1½ in. 39 7324-6843-20
4915 16 ft 1½ in. 39 7324-6849-20
5525 18 ft 1½ in. 39 7324-6855-20
6135 20 ft 1½ in. 39 7324-6861-20
Flushing hole Ø14,5 mm

We’re here to help

Contact us to find out more.

Contact us

* Based on comparison with a standard thread.

Test results and calculations are to be considered as results reached under certain and controlled conditions. These test results and calculations should not be treated as specifications and Sandvik does not guarantee, warrant or represent the outcome of test results or calculations in any or all circumstances.